Four Tips For Common Plumbing Issues

There are many different types of plumbing issues your home may encounter. Unfortunately, if you are not prepared to handle these issues, you may find yourself facing more disruptions and expensive repairs than necessary. To help you with handling these problems, you should be mindful of several plumbing tips and tricks that may help you when problems arise with your home's system.

Identify And Test The Water Shut Off Valves To Your Plumbing Fixtures

Each plumbing fixture will have a primary shut-off valve for the water flowing into it. When the fixture experiences a significant problem, you may need to turn off this valve. In situations where water is pouring out of the fixture, quickly turning off the water can greatly limit the amount of damage that your home experiences. Therefore, you should make sure that you know exactly where these valves are located, and you should perform tests on them every few months to ensure the handle is easy to turn.

Protect Your Pipes Against Harsh, Cold Temperatures

When cold weather arrives in your area, ensuring that the pipes are properly insulated. Ample insulation can help to prevent the water from freezing in the pipes, and this may help your home's pipes with avoiding ruptures and leaks. Luckily, you do not have to install this insulation by yourself as a plumbing professional will be able to identify the pipes in your home that would benefit from this upgrade as well as performing the upgrade on your behalf.

Appreciate Drain Strainers

Limiting the amount of hair and other debris that enters your plumbing system is critical for reducing clogs and other disruptive problems. Yet, homeowners will routinely neglect to install strainers on the drains. Once these strainers have been installed, they will need to be regularly cleaned to remove any materials that have gathered on them. Failure to perform this routine maintenance can result in materials from the strainers making it into the pipes, which can result in a clog forming.

Clean The Aerators And Shower Heads

Mineral accumulations can form on the various plumbing fixtures in your home. In particular, the aerators and shower heads are prone to this problem. When these accumulations develop, they will result in decreased water pressure. Fortunately, it is fairly easy to remove these accumulations with a lengthy soaking in vinegar or alcohol. After several hours of soaking, you should rinse the showerhead and aerators under strong streams of water to remove any mineral deposits that were loosened but not completely dissolved.