3 Important Steps When Maintaining An Industrial Heat Pump

If your industrial site relies on a heat pump to control the temperature inside, it's important to maintain it properly. Failing to do so could result in costly repairs and uncomfortable temperatures inside. Maintaining industrial heat pumps should involve the following steps. 

Keep Air Ducts Clean 

After a while, dirt and other debris can fill your industrial site's ductwork. This may seem insignificant, but dirty air ducts can actually cause your industrial heat pump to work inefficiently. It may even break down prematurely.

As a result, you need to regularly check the air ducts to make sure they're clean. If they're not, it's in your best interest to hire a ductwork company to clean the inner portion of your ducts. These companies have long, high-powered vacuums that can reach up into the air ducts and thoroughly clean all surfaces quickly. 

Lubricate the Motor 

One of the most important parts of your industrial heat pump is the motor, as it's what powers your system throughout the day. In order to make sure it lasts for as long as possible, you'll need to lubricate it on a regular basis. Doing so prevents the motor from overheating and suffering irreversible damage.

When looking for a lubricant, make sure you go with what your heat pump manufacturer recommends. They'll recommend a particular type for optimal performance. Once you do find a recommended lubricant, apply it at the appropriate intervals. 

Inspect Electrical Wires 

In terms of safety and efficiency, you should get in the habit of checking your industrial heat pump's electrical wiring. After all, some wires may get damaged or have loose connections. These issues create fire hazards and could do costly damage to your heat pump, so it's important to contact an industrial heat pump contractor immediately.

They'll follow up on your inspection by providing a thorough assessment of their own. Any damaged or loose wires will be removed and new wires will be set up quickly and correctly. The contractor will then test your heat pump out to make sure there are no further electrical issues. 

It's important to not take the heat pump on your industrial site for granted. It plays such an important role, and because of this, you need to do everything you can to keep it working great. Follow the right maintenance schedule, including cleaning, inspections, and lubrication. Then, your industrial heat pump can work like it should for years and you won't have to pay thousands on repairs. Click here to continue reading about heat pumps.